Welcome, visitor! [ Register | LoginRSS Feed  | 

Machines / Just Listed
Foamer Stork

STORK Foamer FP2C 1996

FOAM PROCESSOR  STORK, model FP2C, year 1996, type 600 litres

5 total views, 1 today

Bleaching line Escale

TVE ESCALE Bleaching line, 1998, w.w. 2800 mm

TVE ESCALE – ASISA bleaching range, working width 2800 mm., composed by: Entry with Bianco J-box accumulator, year 1998 and grooved stretcher cylinders. Prep...

7 total views, 2 today

tsudakoma air jet

TSUDAKOMA AIR JET LOOMS

. TSUDAKOMA : 6  AIR  JET MACHINES  TYPE  ZA  205.   3300 MM.  2 colors   . Year 1992 taffeta 4 shafts. Take up and let off external  batching motion (photo...

10 total views, 1 today

Mahlo weft straightener

MAHLO Weft Straightener, 1998, w.w. 3850 mm

WEFT STRAIGHTENER MAHLO, year 1998, w.w. 3850 mm, type RFMC –GR / 10 6P / FMC -10 4P/4000, 6 heads and inlcuded also a Mahlo brigde for the exit with 4 heads,...

37 total views, 1 today

artos stenter

ARTOS STENTER, 1970, w.w. 4200 mm

ARTOS STENTER, year 1970, w.w. 4200 mm, 5 chambers, horizontal clip chain, gas heating ( new burners and electrical pannel ), cooling zone, exit plaiter and A-f...

32 total views, 1 today

sueding emerizing Torres

Sueding machine TORRES, 1993, w.w. 1800 mm

SUEDING EMERIZING MACHINE TORRES, year 1993, model Micropunt 153, w.w. 1800 mm, 2 sand paper rolls, exit plaiter, with dust suction and bags. Machine like new

6 total views, 2 today

a-frame

100 A-FRAMES MENZEL, w.w. 1800 mm

100 MENZEL A-FRAMES, w.w. 1800 mm, with brake, accoupled Menzel device

7 total views, 2 today

oil boiler Babcock Wanson

Oil Boiler BABCOCK WANSON, 2002, 8.000.000 Kcal/h

OIL BOILER BABCOCK WANSON, year 2002, capacity 8.000.000 Kcal/h with steamer  8.000 kgs, complet with all pipes and valves conexions for steam and oil, gas burn...

6 total views, 1 today

oil boiler Bono

Oil Boiler BONO, 1978, 4.000.000.-Kcal/h

OIL BOILER BONO, year 1978, model OMP4000, capacity 4.000.000 Kcal/h, gas burner

6 total views, 2 today

airo 1000

Tumbler BIANCALANI, model AIRO 1000, 2 ropes

TUMBLER BIANCALANI, model AIRO 1000, year 1990 ( reaconditioned in 1998 ) , 2 ropes

9 total views, 2 today

Machines / Featured Machines
Babcock Stenter

BABCOCK STENTER, 1985, w.w. 2100 mm

BABCOCK STENTER, 1985, 4 chambers, w.w. 2100 mm, oil heating, pin and clip chain, weft straightener REYTEX, padder BETA 3 cylinders ( w.w. 1800 mm ), exit rolli...

47 total views, 7 today

raising machine Xetma

Raising & Sueding XETMA, year 2002, w.w. 2000 mm

RAISING & SUEDING machine XETMA, year 2002, Multisystem XRE, 1 drum, 24 raising cylinders and 24 sueding cylinders

12 total views, 1 today

Padbacht Kusters

Padbacht KUSTERS padder, 222.11-1600 ,w.w. 1600 mm

PADBACHT DYEING KUSTERS PADDER, model 222.11-1600, w.w. 1600 mm, original year 1980 but the dosing system was update by Kusters in 2003, exit A-frame

14 total views, 3 today

Tumbler PENTEK Pentair

Tumbler PENTEK PENTAIR

TUMBLER PENTEK, model PENTAIR 2 BA, year 2004, 2 ropes, gas heating, wet and dry

12 total views, 2 today

Bruckner Stenter

BRUCKNER STENTER w.w.2200 mm 1998

  BRUCKNER STENTER, year 1998, w.w. 2200 mm, 6 chambers, gas heating, horizontal pin chain, entry 6 mts,Padder, cooling zone, exit plaiter and A-frame, wi...

21 total views, 3 today

Jet mcs sf100

Jet MCS SF100 200 kgs

JET MCS SF100, year 2001, 2 ropes, capacity 200 kgs, high temperature, Termoelectronica Programmer, tefloned channels

56 total views, 4 today

Digital printing MS

4 x Digital Printing MS JP5 2008

4 x DIGITAL PRINTING MS, model JP5, year 2007/2008, w.w. 1600 mm, 8 colours, actually working with acids and reactives, but it can works also disperses. In work...

19 total views, 2 today

Jet MCS First

Jet MCS First F-1XJHT 180 kgs

JET MCS, type MCS FIRST F-1XJHT, year 2008, capacity nominal 180 kgs, high temperature, programmer THIES T858, with preparation tank et regulable nozzle. E-m...

19 total views, 2 today

jet thies luftroto

Jet THIES LuftRoto 180 kgs

JET THIES, type LUFT ROTO PLUS SII, year 2009, capacity nominal 180 kgs, 1 rope, with preparation tank,  high temperature, programmer THIES T858 E-mail:  inf...

28 total views, 5 today

artos stenter

ARTOS Stenter 2100 mm

ARTOS STENTER, year 1977, w.w. 2100 mm, 4 chambers, oil heating, pin and clip chain, extended entry, manual weft straihtener, padder ARTOS, cooling zone, exit A...

44 total views, 2 today

Machines / Most Popular
sulzer G6200

8 SULZER G6200 W2000 1998

8 x SULZER G 6200 RAPIER LOOMS,  TYPE N8 SP 28, year 1998, width 2000 mm, 8 Colours, with STAUBLI 2672 electronic dobby 24 Shafts ( 1 x installed 20 and 7 x ins...

86 total views, 5 today

Jet mcs sf100

Jet MCS SF100 200 kgs

JET MCS SF100, year 2001, 2 ropes, capacity 200 kgs, high temperature, Termoelectronica Programmer, tefloned channels

56 total views, 4 today

Babcock Stenter

BABCOCK STENTER, 1985, w.w. 2100 mm

BABCOCK STENTER, 1985, 4 chambers, w.w. 2100 mm, oil heating, pin and clip chain, weft straightener REYTEX, padder BETA 3 cylinders ( w.w. 1800 mm ), exit rolli...

47 total views, 7 today

artos stenter

ARTOS Stenter 2100 mm

ARTOS STENTER, year 1977, w.w. 2100 mm, 4 chambers, oil heating, pin and clip chain, extended entry, manual weft straihtener, padder ARTOS, cooling zone, exit A...

44 total views, 2 today

sanforizing machine tepa

Sanforizing Machine TEPA

SANFORIZING MACHINE make TEPA, year 1990, w.w. 1600 mm, complet entry with guides, cylinder steamer, sanforizing device, palmer, cooling cylinder, J-box, exit p...

40 total views, 3 today

Mahlo weft straightener

MAHLO Weft Straightener, 1998, w.w. 3850 mm

WEFT STRAIGHTENER MAHLO, year 1998, w.w. 3850 mm, type RFMC –GR / 10 6P / FMC -10 4P/4000, 6 heads and inlcuded also a Mahlo brigde for the exit with 4 heads,...

37 total views, 1 today

Hydroextractor GALVANIN for cone yarn

Hydroextractor GALVANIN for cones yarn

. HYDROEXTRACTOR  for  CONES  GALVANIN, year 1998, type CRA-800-18 ROCCHE, capacity 18 cones

36 total views, 6 today

Rope washing Spiraldo Bene

Rope Washing SPIRALDO – BENE

ROPE WASHING MACHINE make SPIRALDO - BENE, year 1990, lenght 5 mts, programmer Coumereg, additional tank E-mail: info@dintex.net

35 total views, 1 today

artos stenter

ARTOS Stenter 1900 mm

ARTOS STENTER, year 1969, w.w. 1900 mm, oil heating, 5 chambers, pin and clip chain, padder Kusters 222.11.1800, cooling zone, exit plaiter. E-mail:  info@di...

33 total views, 1 today

artos stenter

ARTOS STENTER, 1970, w.w. 4200 mm

ARTOS STENTER, year 1970, w.w. 4200 mm, 5 chambers, horizontal clip chain, gas heating ( new burners and electrical pannel ), cooling zone, exit plaiter and A-f...

32 total views, 1 today

ARTOS STENTER, 1970, w.w. 4200 mm

  • Ad 1
  • Ad 2

DIGITAL PRINT make MS JP5

  • Ad 1
  • Ad 2
Subscribe
UA-54582024-1